[résolu]Impossible connecter au backend[..]connexion refusée

Répondre
skunk411
Messages : 11
Enregistré le : 08 octobre 2013, 10:01

[résolu]Impossible connecter au backend[..]connexion refusée

Message par skunk411 » 04 novembre 2013, 16:01

hello !

Je travail sur un EON v4.

J'essaye depuis un long moment d'intégrer un backend Livestatus dans nagvis afin de pouvoir remonter l'état des machines du serveur satellite sur le serveur central.

Sur le satellite, dans /etc/xinetd.d/Mon_Fichier :

Code : Tout sélectionner

service livestatus
{
disable = no
type = UNLISTED
port = 6700
socket_type = stream
protocol = tcp
wait = no
user = nagios
flags = NOLIBWRAP
server = /srv/eyesofnetwork/mk-livestatus-1.2.2p2/bin/unixcat
server_args = /srv/eyesofnetwork/nagios-3.5.0/var/log/rw/live
only_from = 172.17.XX.XX
}
Sur le serveur central dans /srv/eyesofnetwork/nagvis-1.7.9/etc/nagvis.ini.php :

Code : Tout sélectionner

; <?php return 1; ?>
; the line above is to prevent
; viewing this file from web.
; DON'T REMOVE IT!

; ----------------------------
; Default NagVis Configuration File
; At delivery everything here is commented out. The default values are set in the NagVis code.
; You can make your changes here, they'll overwrite the default settings.
; ----------------------------

; ----------------------------
; !!! The sections/variables with a leading ";" won't be recognised by NagVis (commented out) !!!
; ----------------------------

; General options which affect the whole NagVis installation
[global]
; Enable/Disable logging of security related user actions in Nagvis. For
; example user logins and logouts are logged in var/nagvis-audit.log
audit_log=0
;
; Defines the authentication module to use. By default NagVis uses the built-in
; SQLite authentication module. On delivery there is no other authentication
; module available. It is possible to add own authentication modules for
; supporting other authorisation mechanisms. For details take a look at the
; documentation.
;authmodule="CoreAuthModSQLite"
;
; Defines the authorisation module to use. By default NagVis uses the built-in
; SQLite authorisation module. On delivery there is no other authorisation
; module available. It is possible to add own authorisation modules for
; supporting other authorisation mechanisms. For details take a look at the
; documentation.
;authorisationmodule="CoreAuthorisationModSQLite"
;
; Sets the size of the controls in unlocked (edit) mode of the frontend. This
; defaults to a value of 10 which makes each control be sized to 10px * 10px.
;controls_size=10
;
; Dateformat of the time/dates shown in nagvis (For valid format see PHP docs)
;dateformat="Y-m-d H:i:s"
;
; Used to configure the preselected options in the "acknowledge problem" dialog
; dialog_ack_sticky=1
; dialog_ack_notify=1
; dialog_ack_persist=0
;
; File group and mode are applied to all files which are written by NagVis.
; Usualy these values can be left as they are. In some rare cases you might
; want to change these values to make the files writeable/readable by some other
; users in a group.
;file_group=""
;file_mode="660"
;
; The server to use as source for the NagVis geomaps. Must implement the API which
; can be found on http://pafciu17.dev.openstreetmap.org/
;geomap_server="http://geomap.nagvis.org/"
;
; In some cases NagVis needs to open connections to the internet. The cases are:
; - The new geomap needs access to openstreetmap webservices to be able to fetch
;   mapping information
; Most company networks don't allow direct HTTP access to the internet. The most
; networks require the users to use proxy servers for outbound HTTP requests.
; The proxy url to be used in NagVis can be configured here. One possible value
; is "tcp://127.0.0.1:8080".
;http_proxy=""
; Most proxies require authentication to access the internet. Use the format
; "<username>:<password>" to provide auth credentials
;http_proxy_auth=""
; Set the timeout (in seconds) for outbound HTTP requests (for example geomap requests)
;http_timeout=10
;
; Defines which translations of NagVis are available to the users
;language_available="de_DE,en_US,es_ES,fr_FR,pt_BR"
; Language detection steps to use. Available:
;  - User:    The user selection
;  - Session: Language saved in the session (Usually set after first setting an
;             explicit language)
;  - Browser: Detection by user agent information from the browser
;  - Config:  Use configured default language (See below)
language_detection="config"
;language_detection="user,session,browser,config"
;
; Select language (Available by default: en_US, de_DE, fr_FR, pt_BR)
language="fr_FR"
;
; Defines the logon module to use. There are three logon modules to be used by
; default. It is possible to add own logon modules for serving other dialogs or
; ways of logging in. For details take a look at the documentation.
;
; The delivered modules are:
;
; LogonMixed: The mixed logon module uses the LogonEnv module as default and
;   the LogonDialog module as fallback when LogonEnv returns no username. This
;   should fit the requirements of most environments.
;
; LogonDialog: This is an HTML logon dialog for requesting authentication
;   information from the user.
;
; LogonEnv: It is possible to realise a fully "trusted" authentication
;   mechanism like all previous NagVis versions used it before. This way the user
;   is not really authenticated with NagVis. NagVis trusts the provided username
;   implicitly. NagVis uses the configured environment variable to identify the
;   user. You can add several authentication mechanisms to your webserver,
;   starting from the basic authentication used by Nagios (.htaccess) to single
;   sign-on environments.
;   Simply set logonmodule to "LogonEnv", put the environment variable to use as
;   username to the option logonenvvar and tell the authentication module to
;   create users in the database when provided users does not exist. The option
;   logonenvcreaterole tells the module to assign the new user to a specific role
;   set to empty string to disable that behaviour.
;
; LogonMultisite: This module uses the authentication provided by auth_* cookies
;   which have been generated by Check_MK multisite when using the cookie based
;   authentication. Since 1.2.1i2 Check_MK uses a new cookie format. To be able
;   to use this, you need to define a new option called logon_multisite_serials
;   which points to the auth.serial file generated by Check_MK.
;   Special options for this module:
;
;     logon_multisite_htpasswd="/path/to/htpasswd"
;     logon_multisite_serials="/path/to/auth.serials"
;     logon_multisite_secret="/path/to/auth.secret"
;     logon_multisite_createuser="1"
;     logon_multisite_createrole="Guests"
;
logonmodule="LogonMixed"
logonenvvar="REMOTE_USER"
logonenvcreateuser=1
logonenvcreaterole="Guests"
;
; Default rotation time of pages in rotations
;refreshtime=60
;
; Some user information is stored in sessions which are identified by session
; cookies placed on the users computer. The options below set the properties
; of the session cookie.
; Domain to set the cookie for. By default NagVis tries to auto-detect this
; options value by using the webserver's environment variables.
;sesscookiedomain="auto-detect"
; Absolute web path to set the cookie for. This defaults to configured
; paths/htmlbase option
;sesscookiepath="/nagvis"
; Lifetime of the NagVis session cookie in seconds. The default value is set to
; 24 hours. The NagVis session cookie contents will be renewed on every page
; visit. If a session is idle for more time than configured here it will become
; invalid.
;sesscookieduration="86400"
;
; Start page to redirect the user to when first visiting NagVis without
; special parameters.
;startmodule="Overview"
;startaction="view"
; The startshow parameter is only used by some views at the moment. It is used
; by the Map module.
;startshow=""
;
; Turn on to enable some shinken related features in NagVis, like the
; min_business_impact-filter on automaps which can be used to render automaps
; based on the shinken attribute "business_impact".
;shinken_features=0

; Path definitions
[paths]
; absolute physical NagVis path
;base="/usr/local/nagvis/"
; absolute html NagVis path
;htmlbase="/nagvis"
; absolute html NagVis cgi path
htmlcgi="/thruk/cgi-bin"

; Default values which get inherited to the maps and its objects
[defaults]
; default backend (id of the default backend)
backend="eon-gien"
; background color of maps
;backgroundcolor="#ffffff"
; Enable/Disable the context menu on map objects. With the context menu you are
; able to bind commands or links to your map objects
;contextmenu=1
; Choose the default context template
;contexttemplate="default"
; Raise frontend events for problematic objects also on page loading. Set to 1 to
; enable this feature
;event_on_load=0
; Repeat frontend events in the given interval. The interval is configured in seconds.
;event_repeat_interval=0
; The time in seconds to repeat alerts for a problematic ojects for as configured in
; event_repeat_interval. This value defaults to -1, this leads to repeated events
; till the problematic state has been fixed.
;event_repeat_duration=-1
; Enable/Disable changing background color on state changes (Configured color is
; shown when summary state is PENDING, OK or UP)
;eventbackground=0
; Enable/Disable highlighting of the state changing object by adding a flashing
; border
;eventhighlight=1
; The duration of the event highlight in milliseconds (10 seconds by default)
;eventhighlightduration=10000
; The interval of the event highlight in milliseconds (0.5 seconds by default)
;eventhighlightinterval=500
; Enable/Disable the eventlog in the new javascript frontend. The eventlog keeps
; track of important actions and information
;eventlog=0
; Loglevel of the eventlog (available: debug, info, warning, critical)
;eventloglevel="info"
; Number of events kept in the scrollback
;eventlogevents="24"
; Height of the eventlog when visible in px
;eventlogheight="75"
; Hide/Show the eventlog on page load
;eventloghidden="1"
; Enable/Disable scrolling to the icon which changed the state when the icon is
; out of the visible scope
;eventscroll=1
; Enable/Disable sound signals on state changes
;eventsound=1
; enable/disable header menu
;headermenu="1"
; header template
;headertemplate="default"
; Enable/Diable the fading effect of the submenus in the header menu
;headerfade=1
; enable/disable hover menu
;hovermenu=1
; hover template
;hovertemplate="default"
; hover menu open delay (seconds)
;hoverdelay=0
; show children in hover menus
;hoverchildsshow=1
; limit shown child objects to n
;hoverchildslimit="10"
; order method of children (desc: descending, asc: ascending)
;hoverchildsorder="asc"
; sort method of children (s: state, a: alphabetical)
;hoverchildssort="s"
; default icons
;icons="std_medium"
; recognize only hard states (not soft)
;onlyhardstates=0
; recognize service states in host/hostgroup objects
;recognizeservices=1
; show map in lists (dropdowns, index page, ...)
;showinlists=1
; show map in multisite snapin
;showinmultisite=1
; Name of the custom stylesheet to use on the maps (The file needs to be located
; in the share/nagvis/styles directory)
;stylesheet=""
; target for the icon links
;urltarget="_self"
; URL template for host object links
;hosturl="[htmlcgi]/status.cgi?host=[host_name]"
; URL template for hostgroup object links
;hostgroupurl="[htmlcgi]/status.cgi?hostgroup=[hostgroup_name]"
; URL template for service object links
;serviceurl="[htmlcgi]/extinfo.cgi?type=2&host=[host_name]&service=[service_description]"
; URL template for servicegroup object links
;servicegroupurl="[htmlcgi]/status.cgi?servicegroup=[servicegroup_name]&style=detail"
; URL template for nested map links
;mapurl="[htmlbase]/index.php?mod=Map&act=view&show=[map_name]"
; Templates to be used for the different views.
;view_template="default"
; Enable/disable object labels for all objects
;label_show=0
; Configure the colors used by weathermap lines
;line_weather_colors="10:#8c00ff,25:#2020ff,40:#00c0ff,55:#00f000,70:#f0f000,85:#ffc000,100:#ff0000"

; Options to configure the Overview page of NagVis
[index]
; Color of the overview background
;backgroundcolor=#ffffff
; Set number of map cells per row
;cellsperrow=4
; enable/disable header menu
;headermenu="1"
; header template
;headertemplate="default"
; Enable/Disable map listing
;showmaps=1
; Enable/Disable geomap listing
;   Note: It is disabled here since it is unfinished yet and not for production
;         use in current 1.5 code.
;showgeomap=0
; Enable/Disable rotation listing
showrotations=1
; Enable/Disable map thumbnails
showmapthumbs=1

; Options for the Automap
[automap]
; Default URL parameters for links to the automap
; defaultparams="&childLayers=2"
; Default root host (NagVis uses this if it can't detect it via backend)
; You can configure a hostname here or use "<<<monitoring>>>" as "virtual"
; node which shows the parent tree and all hosts which have no parents
; defined below the is node.
;defaultroot="<<<monitoring>>>"
; Path to the graphviz binaries (dot,neato,...); Only needed if not in ENV PATH
;graphvizpath="/usr/bin/"

; Options for the WUI
[wui]
; map lock time (minutes). When a user edits a map other users trying to edit
; the map are warned about this fact.
;maplocktime=5
; Show/hide the grid
;grid_show=0
; The color of the grid lines
;grid_color="#D5DCEF"
; The space between the single grid lines in pixels
;grid_steps=32

; Options for the new Javascript worker
[worker]
; The interval in seconds in which the worker will check for objects which need
; to be updated
;interval=10
; The maximum number of parameters used in ajax http requests
; Some intrusion detection/prevention systems have a problem with
; too many parameters in the url. Give 0 for no limit.
;requestmaxparams=0
; The maximum length of http request urls during ajax http requests
; Some intrusion detection/prevention systems have a problem with
; queries being too long
;requestmaxlength=1900
; The retention time of the states in the frontend in seconds. The state
; information will be refreshed after this time
;updateobjectstates=30

; ----------------------------
; Backend definitions
; ----------------------------

; Example definition of a livestatus backend.
; In this case the backend_id is live_1
; The path /usr/local/nagios/var/rw has to exist
[backend_eon-gien]
backendtype="mklivestatus"
socket="tcp:172.18.XX.XX:6700"
; The status host can be used to prevent annoying timeouts when a backend is not
; reachable. This is only useful in multi backend setups.
;
; It works as follows: The assumption is that there is a "local" backend which
; monitors the host of the "remote" backend. When the remote backend host is
; reported as UP the backend is queried as normal.
; When the remote backend host is reported as "DOWN" or "UNREACHABLE" NagVis won't
; try to connect to the backend anymore until the backend host gets available again.
;
; The statushost needs to be given in the following format:
;   "<backend_id>:<hostname>" -> e.g. "live_2:nagios"
;statushost=""
;socket="unix:/srv/eyesofnetwork/nagios/var/log/rw/live"

; Example definition for a MySQL backend
; in this example the ID of the Backend is "ndomy_1" you can define another ID.
timeout=500
;htmlcgi="/srv/eyesofnetwork/nagios-3.5.0/sbin/"
[backend_ndomy_1]
; type of backend - MUST be set
backendtype="ndomy"
; The status host can be used to prevent annoying timeouts when a backend is not
; reachable. This is only useful in multi backend setups.
;
; It works as follows: The assumption is that there is a "local" backend which
; monitors the host of the "remote" backend. When the remote backend host is
; reported as UP the backend is queried as normal.
; When the remote backend host is reported as "DOWN" or "UNREACHABLE" NagVis won't
; try to connect to the backend anymore until the backend host gets available again.
;
; The statushost needs to be given in the following format:
;   "<backend_id>:<hostname>" -> e.g. "live_2:nagios"
;statushost=""
; hostname for NDO-db
;dbhost="localhost"
; portname for NDO-db
;dbport=3306
; database name for NDO-db
;dbname="nagios"
; username for NDO-db
;dbuser="root"
; password for NDO-db
;dbpass=""
; prefix for tables in NDO-db
;dbprefix="nagios_"
; instance name for tables in NDO-db
;dbinstancename="default"
; maximum delay of the NDO Database in seconds
;maxtimewithoutupdate=180
; path to the cgi-bin of this backend
;htmlcgi="/thruk/cgi-bin"

; Example definition of a Merlin backend
; in this example the ID of the Backend is "merlinmy_1" you can define another ID.
[backend_merlinmy_1]
; type of backend - MUST be set
backendtype="merlinmy"
; hostname for Merlin db
;dbhost="localhost"
; portname for Merlin db
;dbport=3306
; database name for Merlin db
;dbname="merlin"
; username for Merlin db
;dbuser="merlin"
; password for Merlin db
;dbpass="merlin"
; maximum delay of the Merlin Database in seconds
;maxtimewithoutupdate=180
; path to the cgi-bin of this backend

htmlcgi="/srv/eyesofnetwork/nagios-3.5.0/sbin/"

; ----------------------------
; Rotation pool definitions
; ----------------------------

; in this example the browser switches between the maps demo and demo2 every 15
; seconds, the rotation is enabled by url: index.php?rotation=demo
[rotation_demo]
; These steps are rotated. The single steps may have optional prefixes like "Demo2:"
; which are used as display text on the index pages rotation list.
; You may also add external URLs as steps. Simply enclose the url using []
maps="demo-germany,demo-ham-racks,demo-load,demo-muc-srv1"
; rotation interval (seconds)
interval=15

; ----------------------------
; Action definitions
; ----------------------------
; Since NagVis 1.7.6 it is possible to use so called actions to extend the
; default context menu. This enables users to connect directly to the monitored
; hosts from the NagVis context menu. Here you can configure those actions.
;
; It is possible to add such actions to the context menus of service and host
; objects. They are not added blindly to all objects of those types, you can
; use the attribute "condition" to configure which objects shal have the
; specific actions. By default we use Nagios custom macros of the host object
; to make the actions visible/invisible. This filtering mechanism is not limited
; to custom macros, you can also use regular host attributes which are available
; within NagVis.
; With the option "client_os" you can configure the option to only be available
; on the clients which have a listed operating system running.

; Adds the action "connect via rdp" to service/host objects where the host object
; has the string "win" in the TAGS Nagios custom macro.
; When clicking on the link, NagVis generates a .rdp file which contains makes
; the client connect to the given host via RDP.
;[action_rdp]
;action_type="rdp"
;obj_type="host,service"
;condition="TAGS~win"
;client_os="win"
;domain=""
;username=""

; Adds the action "connect via ssh" to service/host objects which have the
; string "unix" in the TAGS Nagios custom macro. Is only added when NagVis
; detects that the client watching the map uses windows.
; When clicking on the link, NagVis generates a .cmd file which contains a
; call to putty which makes putty connect via SSH to this host.
;[action_win_ssh]
;action_type="win_ssh"
;obj_type="host,service"
;client_os="win"
;condition="TAGS~unix"

; Adds the action "connect via ssh" to service/host objects which have the
; string "unix" in the TAGS Nagios custom macro. Is only added when NagVis
; detects that the client watching the map uses linux or mac os.
; When clicking on the link, the browser opens the URL ssh://<address>/,
; you need to configure your clients browser to handle these urls correctly.
;[action_ssh_url]
;action_type="ssh_url"
;obj_type="host,service"
;client_os="mac,lnx"
;condition="TAGS~unix"

; Adds the action "connect via http" to service/host objects which have the
; string "web-80" in the TAGS Nagios custom macro
; When clicking on the link, the browser opens a new window with the URL
; http://<host_address>/. This can be changed by modyfing the context template.
;[action_http]
;action_type="http"
;obj_type="host,service"
;condition="TAGS~web-80"

; Adds the action "connect via http" to service/host objects which have the
; string "web-443" in the TAGS Nagios custom macro
; When clicking on the link, the browser opens a new window with the URL
; https://<host_address>/. This can be changed by modyfing the context template.
;[action_https]
;action_type="https"
;obj_type="host,service"
;condition="TAGS~web-443"

; ------------------------------------------------------------------------------
; Below you find some advanced stuff
; ------------------------------------------------------------------------------

; Configure different state related settings
[states]
; State coverage/weight: This defines the state handling behaviour. For example
; a critical state will cover a warning state and an acknowledged critical
; state will not cover a warning state.
;
; These options are being used when calculating the summary state of the map
; objects. The default values should fit most needs.
;
;down=10
;down_ack=6
;down_downtime=6
;unreachable=9
;unreachable_ack=6
;unreachable_downtime=6
;critical=8
;critical_ack=6
;critical_downtime=6
;warning=7
;warning_ack=5
;warning_downtime=5
;unknown=4
;unknown_ack=3
;unknown_downtime=3
;error=4
;error_ack=3
;error_downtime=3
;up=2
;ok=1
;unchecked=0
;pending=0
;
; Colors of the different states. The colors are used in lines and hover menus
; and for example in the frontend highlight and background event handler
;
;unreachable_bgcolor=#F1811B
;unreachable_color=#F1811B
;unreachable_ack_bgcolor=
;unreachable_downtime_bgcolor=
;down_bgcolor=#FF0000
;down_color=#FF0000
;down_ack_bgcolor=
;down_downtime_bgcolor=
;critical_bgcolor=#FF0000
;critical_color=#FF0000
;critical_ack_bgcolor=
;critical_downtime_bgcolor=
;warning_bgcolor=#FFFF00
;warning_color=#FFFF00
;warning_ack_bgcolor=
;warning_downtime_bgcolor=
;unknown_bgcolor=#FFCC66
;unknown_color=#FFCC66
;unknown_ack_bgcolor=
;unknown_downtime_bgcolor=
;error_bgcolor=#0000FF
;error_color=#0000FF
;up_bgcolor=#00FF00
;up_color=#00FF00
;ok_bgcolor=#00FF00
;ok_color=#00FF00
;unchecked_bgcolor=#C0C0C0
;unchecked_color=#C0C0C0
;pending_bgcolor=#C0C0C0
;pending_color=#C0C0C0
;
; Sound of the different states to be used by the sound eventhandler in the
; frontend. The sounds are only being fired when changing to some
; worse state.
;
;unreachable_sound=std_unreachable.mp3
;down_sound=std_down.mp3
;critical_sound=std_critical.mp3
;warning_sound=std_warning.mp3
;unknown_sound=
;error_sound=
;up_sound=
;ok_sound=
;unchecked_sound=
;pending_sound=

; -------------------------
; EOF
; -------------------------
mon fichier nagios.cfg:

Code : Tout sélectionner

# Written by NagiosMainExporter from Eonweb Configurator 2.3 on October 29, 2013, 3:31 pm

log_file=/srv/eyesofnetwork/nagios/var/log/nagios.log
temp_file=/srv/eyesofnetwork/nagios/var/log/nagios.tmp
status_file=/srv/eyesofnetwork/nagios/var/log/status.dat
status_update_interval=15
nagios_user=nagios
nagios_group=eyesofnetwork
enable_notifications=1
execute_service_checks=1
accept_passive_service_checks=0
enable_event_handlers=1
log_rotation_method=d
log_archive_path=/srv/eyesofnetwork/nagios/var/log/archives
check_external_commands=1
command_check_interval=-1
command_file=/srv/eyesofnetwork/nagios/var/log/rw/nagios.cmd
lock_file=/var/run/nagios.pid
retain_state_information=1
state_retention_file=/srv/eyesofnetwork/nagios/var/log/retention.dat
retention_update_interval=60
use_retained_program_state=1
use_syslog=0
log_notifications=1
log_service_retries=1
log_host_retries=1
log_event_handlers=1
log_initial_states=0
log_external_commands=1
log_passive_checks=1
global_host_event_handler=event-browser-host
global_service_event_handler=event-browser-service
sleep_time=0.25
service_interleave_factor=s
max_concurrent_checks=0
service_reaper_frequency=10
interval_length=60
use_aggressive_host_checking=0
enable_flap_detection=1
low_service_flap_threshold=5
high_service_flap_threshold=20
low_host_flap_threshold=5
high_host_flap_threshold=20
soft_state_dependencies=0
service_check_timeout=20
host_check_timeout=10
event_handler_timeout=30
notification_timeout=30
ocsp_timeout=5
perfdata_timeout=5
obsess_over_services=0
process_performance_data=0
check_for_orphaned_services=0
check_service_freshness=1
date_format=euro
illegal_object_name_chars=`~!$%^&*|\'"<>?,()=
illegal_macro_output_chars=`~$&|\'"<>
admin_email=nagios
admin_pager=pagenagios
execute_host_checks=1
service_inter_check_delay_method=s
use_retained_scheduling_info=0
accept_passive_host_checks=0
max_service_check_spread=30
host_inter_check_delay_method=s
max_host_check_spread=30
auto_reschedule_checks=0
auto_rescheduling_interval=30
auto_rescheduling_window=180
check_host_freshness=1
host_freshness_check_interval=60
service_freshness_check_interval=60
use_regexp_matching=0
use_true_regexp_matching=0
event_broker_options=-1
daemon_dumps_core=0
host_perfdata_command=check-host-alive
service_perfdata_command=check-host-alive
host_perfdata_file_mode=a
service_perfdata_file_mode=a
object_cache_file=/srv/eyesofnetwork/nagios/var/log/objects.cache
broker_module=/srv/eyesofnetwork/mk-livestatus/lib/livestatus.o /srv/eyesofnetwork/nagios/var/log/rw/live
resource_file=/srv/eyesofnetwork/nagios/etc/resource.cfg
cfg_dir=/srv/eyesofnetwork/nagios/etc/objects
Donc lorsque je suis sur le Nagvis de mon serveur central, voici le message d'erreur affiché sur les machines du serveur satellite:

Problem (Backend: eon-gien): Impossible de connecter au socket "" du backend "eon-gien": connexion refusée

Je cherche puis je cherche et je ne trouve rien... :cry:

help please :roll:
Modifié en dernier par skunk411 le 07 novembre 2013, 08:48, modifié 1 fois.
On a toujours le choix...

Avatar du membre
Guiona
Messages : 762
Enregistré le : 18 janvier 2012, 16:36
Localisation : Toulouse
Contact :

Re: Impossible de se connecter au backend[...]connexion refu

Message par Guiona » 04 novembre 2013, 21:20

Regarde ce post http://forum.eyesofnetwork.com/viewtopi ... t=10#p5497
Je donnes toute la conf et les manip pour valider que cela fonctionne avec nc (alias netcat).
Une fois que ceci fonctionnera, on regardera ton backend de type livestatus pour nagvis ;-)
La connaissance appartient à ceux qui la partagent.

skunk411
Messages : 11
Enregistré le : 08 octobre 2013, 10:01

Re: Impossible de se connecter au backend[...]connexion refu

Message par skunk411 » 05 novembre 2013, 17:40

Guiona a écrit :Regarde ce post http://forum.eyesofnetwork.com/viewtopi ... t=10#p5497
Je donnes toute la conf et les manip pour valider que cela fonctionne avec nc (alias netcat).
Une fois que ceci fonctionnera, on regardera ton backend de type livestatus pour nagvis ;-)
Merci pour cette réponse rapide et très précise :D

Donc j'ai appliqué la conf que tu m'as fourni, et ça ne fonctionnait toujours pas... J'ai donc vérifié l'ensemble de ma configuration (notamment les emplacements des fichiers comme /srv/eyesofnetwork/mk-livestatus/bin/unixcat) , et ce dernier n'était plus présent. Je l'ai rajouté à partir d'un backup et tout c'est mis à fonctionner :)

Donc voilà tout est parfait désormais =) Merci encore Guiona ;)
On a toujours le choix...

Répondre